W/O emulsion EX005 Cold cream

Firm white emulsion.

References: [1]

Base or auxiliary excipient for further compounding. Its BUD is not adopted unchanged after adding an active.

References: [1]

Firm white emulsion.

References: [1]

No specific information is established by the consulted sources. Complete this before local approval where critical to this preparation.

References: [1]

No specific information is established by the consulted sources. Complete this before local approval where critical to this preparation.

References: [1]

No specific information is established by the consulted sources. Complete this before local approval where critical to this preparation.

References: [1]

Borax is efflorescent; verify the exact hydrated raw-material form.

References: [2]

For the finished product the source specifies:
Opaque jar, well closed, <25°C.

References: [1]

No specific information is established by the consulted sources. Complete this before local approval where critical to this preparation.

References: [1]

Borax: incompatibilities with strong acids and heavy-metal salts.

References: [2]

Borax: Borax is efflorescent; verify the exact hydrated raw-material form.
These are selected facts for identified ingredients; relevant sensitivities and incompatibilities are detailed in the corresponding fields. This is not a complete SDS for every material.

References: [2]

Complete formula-specific PPE is not specified. Select gloves, eye protection and exposure controls using the exact materials’ SDS and the local risk assessment.
Supplementary AEMPS framework: clean long-sleeved laboratory clothing, hair covering and dedicated footwear/overshoes. Powder handling requires suitable eye/respiratory protection; change gloves with activity or damage. Select the exact type/material using SDS and risk assessment.

References: [1] · [3]

A complete formula-specific hazard classification is not established. Assess potency, dust/aerosol, allergens, solvents, microbial risk and cross-contamination using the actual materials and process. Absence of a flag does not establish absence of hazard.

References: [1]

The corresponding AEMPS SOP specifies room temperature 25 ± 5°C and relative humidity ≤60%, unless the particular formula requires otherwise. This is the work environment, not processing or storage temperature.
Follow the addition sequence, temperatures and times stated under Preparation Procedure. The specific monograph is not a complete qualification of the local facility/equipment.

References: [1] · [4]

6 months under the source conditions.
The source period applies to its exact composition, method and packaging. It is not this batch’s expiry date and cannot be transferred to another vehicle/strength. Calculate the actual date in the blank batch record.

References: [1]

No separate base is identified in the dependency register. Check any commercial vehicles/compound excipients listed in the formula.

References: [1]

Indicative checklist derived from the method: Balance of suitable resolution, Containers and mixing tools compatible with the materials, Controlled heating and thermometer, Calibrated pH meter. Selection/qualification is defined locally.

References: [1]

Under PN/L/FF/002/00, heat the oil phase at least enough to melt its highest-melting ingredient. Bring the aqueous phase to the same temperature. Add aqueous to oil phase and mix moderately while cooling. The specific monograph gives no numerical temperature.

References: [1] · [4]

Almond-oil/rose-water variants are different formulas. The source flags rancidity in the almond-oil variant.

References: [1]

Opaque jar, well closed, <25°C.

References: [1]

Firm white emulsion.
Additional tests from the referenced SOP:
Appearance and mass. For batches: spreadability PN/CP/003, emulsion type PN/CP/002, pH of O/W emulsions PN/CP/001 and microbiological testing RFE 5.1.4.
pH under PN/CP/001: normally test the untreated sample unless otherwise specified. Accurate measurement follows potentiometric RFE 2.2.3; strips are limited to checks not requiring high accuracy.
Spreadability PN/CP/003: fixed sample quantity between glass plates, with locally defined successive loads and times; measure two diameters and compare area against load. Temperature variation of ±0.5°C is suggested. The source gives no universal acceptance limit; establish it locally.

References: [1] · [4] · [5] · [6]

Opaque jar, well closed, <25°C.

References: [1]

No additional special directions are established beyond the source route, storage and notes. Complete patient details, dose and directions from the prescription.

References: [1]

W/O emulsion EX005 Cold cream
Strength/variant: __________ Quantity: __________
Batch: __________ Prepared: __________ Use by: __________
Για εργαστηριακή ενσωμάτωση / For incorporation during compounding
Dose/directions: __________
Storage: Opaque jar, well closed, <25°C.

References: [1]